digital display DA

The digital displays DA are used as indicators by using external sensors with 0-10 V or 4-20 mA output.
If necessary it can be used for adjust the zeropoint of the connected sensor. At many applications the sensor is installed at difficult accessible places. Therefore it is often difficult to adjust the zero-point direct at the sensor. The digital-displays makes it possible to add or subtract a correction voltage or current to the sensor signal.
The aluminium housing has a high mechanical stability and good EMC-properties. It is suitable for installation into a control switchboard. If the input signal passes the critical value 20 mA or 10 V a red LED on the front indicates the overload of the sensor.
DA can be completed with several additional options: two switching outputs, RS232-interface or 4-20 mA transmitter.

digital display DA

More sub catagories:

DA basic equipment

DA basic equipment

operation temperature range: -20 bis +50 °C
power supply: 15-24 VDC, 24 VAC oder 230 VAC +/- 10 %
input signals: 0-10 V or 4-20mA
burden resistor for 4-20mA: 100 Ohm

Please tell us in the comment field at the end of your order, for which display range (pressure range) you need the DA. It's possible to deliver nearly every display/pressure range.
For additional informations you can read the datasheet .

modules for DA

modules for DA

It's possible to complete the DA with several additional modules, so you can adapt DMG3 for various purposes.



Live Shopping


Languages

Deutsch English

Shopping Cart

You do not have any products in your shopping cart yet.

Welcome back !

eMail Address:

Password:

Password forgotten?


*(c) eComBASE SHOP SUPPORT*  |  *Design* Merlyn Design  |  customized by www.drucksensorik.de


Kalinsky Sensor Elektronik GmbH & Co.KG
Elektronische Drucksensoren und Druckmessgeräte




Parse Time: 0.139s