wall mounting gauge
The pressure transmitters of the series DMU measures overpressure, vacuum, difference- and absolute pressure and velocity of flow in air and non aggressive gases. The measuring values are directed to a 0-10 V analog output (DMU4) or a 4-20 mA output (DMU2).They are shown on a 3,5-digit LED-Display with at figure height of 12,7 mm.
The DMU2 has a 4-20 mA- 2-wire output, that means its no external power supply required. Because of used piezoresistive cells the pressure transmitter reaches high reliability and precision. The enclosure has protection class IP65. It is suitable for wall-mounting installation. The user is warned against overload pressure by a red LED on the front.
More sub catagories:
operation-temperature range: -20 to +50 °C
medium: air and all non aggressive gases
output signal: 4-20 mA 2-wire
power supply: 24 V DC
burden resistor 20-400 Ohm
For additional informations you can read the datasheet.
It's possible to deliver various ranges of pressure transmitters different from the table.
medium: air and all non aggressive gases
output signal: 4-20 mA 2-wire
power supply: 24 V DC
burden resistor 20-400 Ohm
For additional informations you can read the datasheet.
It's possible to deliver various ranges of pressure transmitters different from the table.
operation-temperature range: -20 bis +50 °C
medium: air and all non aggressive gases
output signal: 0-10 V
power supply: 24 V DC
For additional informations you can read the datasheet.
It's possible to deliver various ranges of pressure transmitters different from the table.
medium: air and all non aggressive gases
output signal: 0-10 V
power supply: 24 V DC
For additional informations you can read the datasheet.
It's possible to deliver various ranges of pressure transmitters different from the table.
